Yamaha R6 Forum: YZF-R6 Forums banner
1 - 1 of 1 Posts

· Just lean harder...
Joined
·
884 Posts
Vortex rearsets have no provision for the factory brake switch, they need to have a hydraulic pressure switch installed on the rear master cylinder. The front switch might be damaged or the lever is not contacting it properly, kind of weird because the switch is depressed to turn off the brake light.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top