Yamaha R6 Forum: YZF-R6 Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
K so just the other day the gauges on my 2000 R6 decided to stop working....no background light, tac, speedometer, temp gauge etc. the only thing that works on the gauge cluster is the nutral light and the turn signals...if anyone could give me some advise on what to look at that would be great. bike still runs and drives fine. thanks
 

· Registered
Joined
·
7,434 Posts
check eBay and get a new cluster panel...I bet something inside there fried. You might get lucky and check the fuses too...
 

· Registered
Joined
·
30 Posts
Discussion Starter · #5 ·
well i know thats its not my gauges because i plugged in an old set i have laying around and it still does the same thing.....i will check all the fuses and also the wires coming out and let you guys know if anything works, thanks.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top