Yamaha R6 Forum: YZF-R6 Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
406 Posts
Discussion Starter · #1 ·
... take the headlight glass off of the headlight housing? I see the little tabs, about five, around it, pulled them all up, and the lens won't budge. There's 3 screws on each side in the back of the headlight assembly..., they just spin and spin.

I need to get in there to mount the blinkers. It's an 04..., thanks for the help.
 

·
Registered
Joined
·
373 Posts
Have you finished it yet? How did it turn out? Oh, and why do you need to remove the clear lens? I would think you could just drill through the back of the housing and put the signals in that way. That's what I did.
 

·
Registered
Joined
·
586 Posts
Or instead of drilling, to prevent shavings from getting into the housing, you can heat up the end of a copper tube and melt through it. Be sure to use the right diameter.
 
1 - 6 of 6 Posts
Top