Yamaha R6 Forum: YZF-R6 Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
159 Posts
Discussion Starter · #1 ·
I read a write up on how to fix this on another forum. I have a 99 R6, and the throttle play is horrible, so I went ahead and took off everything I needed to access the cables and near the carb, but how the hell do you get at the adjustment on the eariler r6s? Its right behind the frame. I see the write up was on an 03 or higher and its in a dif spot on the older ones. I really dont see how anyone could get their hand or tool in there to access it? any ideas?
 

·
Registered
Joined
·
31 Posts
It's right by the rh griip. At the top of the cable is a little nut and a longer ex shaped fitting. Loosen the nut and turn the fitting. No need to disassemble...
 
1 - 4 of 4 Posts
Top