[Stanton29]

So I have been looking all over the place for a picture of what the idle speed screw looks like on my 08 R6S. My bike is keeping the idle at 500-700 rpms which is causing my bike to stall out when downshifting when coming to a stop. So i was wondering if anyone could post a pic for me to see where this screw is located so i can hopefully fix the issue.

 

[xero007]

Make sure your oil level is correct. If I remember correctly, the screw is brass/gold in color it can be reached from the right(exhaust side) of the bike with out taking anything off. It has a cross in it for a screwdriver but the outside diameter is round with dimples in it. The screw is attached to a wire cable, so when you spin the screw you are actually spinning the cable. It most likely is snapped into a bracket to keep it in place.

 

[b.burton]

Page 201-202

http://www.r6messagenet.com/forums/pdf/2007_R6S_Service.pdf

 

[Redhound6]

On my 04 it just to the right of the oil cap and it is snapped into a bracket.