Yamaha R6 Forum: YZF-R6 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi,

Im trying to install this Dashcam (https://smile.amazon.com/gp/product/B09GYFLM1J/ref=ask_ql_qh_dp_hza) However, they do not give very detailed instructions. On the cable that connects the power, there are 3 wires: 1&2 go to battery + & -, but the 3rd one is supposed to go to the ignition switch, so that when the bike key is turned and the bike turns on, the camera will turn on.

Does anyone have the ignition diagram or know what wire I can splice into?

Thank you!
 

·
Registered
Everything you need to know is in the Service Manual !
Joined
·
177 Posts
Hi,

Im trying to install this Dashcam (https://smile.amazon.com/gp/product/B09GYFLM1J/ref=ask_ql_qh_dp_hza) However, they do not give very detailed instructions. On the cable that connects the power, there are 3 wires: 1&2 go to battery + & -, but the 3rd one is supposed to go to the ignition switch, so that when the bike key is turned and the bike turns on, the camera will turn on.

Does anyone have the ignition diagram or know what wire I can splice into?

Thank you!
You could run + - straight to battery and use a toggle for power. I wouldn’t splice knto the ignition without at least an inline fuse just in case there’s a short or something that and blows the ignition fuse or kills the bike while you’re riding.
There should be a diagram in the service manual if you do want to go that route.
 
1 - 3 of 3 Posts
Top