Yamaha R6 Forum: YZF-R6 Forums banner
1 - 20 of 21 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
I am still a newbie. I just picked up my first bike a couple of months ago; used 02-R6. I was wondering if this was normal. For some reason, I have 2 frame sliders on the right side of my bike and one on the left? I showed a guy that works at the dealership and his response was; "What kind of Mickey Mouse $#^t is that"? He said that one slider was mounted into the swing arm something and that it might cause problems. What do you think?

 

·
.............
Joined
·
12,482 Posts
I bought one on Ebay a year ago for my '04, but was too lazy to install it (plus, I didn't have the right socket to fit the large a$$ nut...)

one question: why is it called a clutch slider if it's NOT on the clutch side?
 

·
Registered
Joined
·
324 Posts
I bought one on Ebay a year ago for my '04, but was too lazy to install it (plus, I didn't have the right socket to fit the large a$$ nut...)

one question: why is it called a clutch slider if it's NOT on the clutch side?
that is where the clutch is. follow the cable from your handlebars and you will see.
 

·
Registered
Joined
·
336 Posts
My Clutch is on the right side, my clutch cable runs down to the right side andyou can see the lever releasing the clucth in action.
 

·
.............
Joined
·
12,482 Posts
Maybe I'm getting my terminology wrong...

Shifter: Left foot
Rear Brake: Right foot
Clutch: Left Hand
Throttle: right hand

Are those correct? it's too dark to go outside and follow the clutch cable down to the engine. maybe tomorrow.
 

·
My R6 shoots tequila
Joined
·
1,487 Posts
Maybe I'm getting my terminology wrong...

Shifter: Left foot
Rear Brake: Right foot
Clutch: Left Hand
Throttle: right hand

Are those correct? it's too dark to go outside and follow the clutch cable down to the engine. maybe tomorrow.
Your mistaken bro. The slider is for the clutch casing not the cluth lever or shifter. That weird though I've never seen it, but these guys say its normal so hey.
 

·
Deep Thinker
Joined
·
927 Posts
Just to clarify since this seems to be a problem:

The Clutch Lever is on the left handlebar.
The Clutch (as in clutch plate and other working components) is down low by your right foot. There are no clutch controls in this area.
 

·
Chi-Towns Finest
Joined
·
347 Posts
i have one on my bike, i have been trying to find a gear slider (for the left side) to even the look out and a little more protection, but i cant seem to find anything...anyone know where i can find one?
 

·
Registered
Joined
·
20 Posts
Discussion Starter · #19 ·
Hope this helps. This is what it looks like under my clutch slider. It seems to have some sort of huge socket-looking bolt on there with a drilled hole for the attachment bolt. Hope this helps.




 

·
chromed the **** out
Joined
·
8 Posts
that just looks wierd to me. the one mounted to the motor mout through the fairing looks goo but on the frame is kind of like a sore thumb
 
1 - 20 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top