Yamaha R6 Forum: YZF-R6 Forums banner

Just To Reference.. Help Also

1K views 21 replies 7 participants last post by  GIJoe007 
#1 ·
Well, I've been struck by the modititus bug. I plan on buying a MotoDynamic integrated tail and a Graves Fender Eliminator tomorrow. I just want to know exactly how to remove the tail section. I searched, I suck. Also, I read about these relays people bought because the flashers were way off?

Just wanting to get my information correct before I go buying this stuff, because it ain't cheap! To me.

Thanks fellow 6ers!
 
#2 ·
Tail section is easy to remove.
1. Take off your passenger seat
2. Disconnect the two turn signal wires (Should be black and grey)
3. Disconnect the tail light wire (Should be a big white one)
4. Disconnect the plate light (Should be 2 of them in tubes)
5. Loosen the bolts (I believe it's a 10mm socket)
6. Take it off
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top