Yamaha R6 Forum: YZF-R6 Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hey guys after installing an after market toce slip-on, my bike kinda rides stiffer and wobbly at low speeds. does that have anything to do with me not re-installing the servo motor back? does that control stability? i used a exup eliminator. first day riding it after install so, do i just have to get use to the ride or is there really an issue?

-Thanks
 

·
Registered
Joined
·
484 Posts
What year R6? If you eliminated the cat and stock muffler than you took off a lot of weight and replaced it with a pipe that is fairly un-restrictive; I don't think their pipes have much if any packing material. That could explain why it feels "wobbly" (less weight, easier to flick around) and "stiff" (less weight on the suspension).
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 · (Edited)
it is a 2012 r6, for some reason i was reading around and thought i came across something stating it controlled stability. i will also check my tire pressure as i read that as well. just riding to work this morning and it just kind of felt weird

**and i only took off the muffler left the cat on
 
1 - 7 of 7 Posts
Top