Yamaha R6 Forum: YZF-R6 Forums banner

1 - 13 of 13 Posts

·
Premium Member
Joined
·
250 Posts
Discussion Starter #1
Ive got a 2014 R6 and wondering what LED headlight bulbs everyone is running. A nice plug and play system would be nice and is there a setup that easy to make both headlights be on at the same time using the new LED bulbs?
 

·
Registered
Joined
·
350 Posts
Ive got a 2014 R6 and wondering what LED headlight bulbs everyone is running. A nice plug and play system would be nice and is there a setup that easy to make both headlights be on at the same time using the new LED bulbs?
https://cyclerevive.com/drim-system/

Pretty cool concept. Although I just started it, so not a lot of money to get a quality enclosure made. Enclosures are 3D printed for now.
 

·
Registered
Joined
·
131 Posts
Thats an excellent concept. I bought a pair of H4 bulbs and spliced into my factory wiring so i could have both headlight on low and high beam. I would have much rather had that module!
 

·
Registered
Joined
·
2,015 Posts
Another option is to mask off the top part of the front headlamp, thereby allowing them to be run evenings and nights. Unless you use something temporary, like electrical tape, you'd loose high-beam as an option. There are plastic films that can be removed and reapplied. Customer service or engineering staff here might be helpful.
https://www.mcmaster.com/plastic-film
 

·
nom
Joined
·
10 Posts
I was actually looking at these, I bought this in an H4 bulb for my 2018 MT 07 and I absolutely love it but it's H4 and the heat sink deal hangs out the back of the housing with a dust cover so no water gets into the bulb housing bit

 

·
Registered
Joined
·
350 Posts
Yeah, there’s the R6s and R6r. If you’re simply just worried about the heat sinks sticking out the back too far, there’s a LED cap adapter made for this specific issue.

Try: https://cyclerevive.com/led_headlight_cap_adapters/

I was actually looking at these, I bought this in an H4 bulb for my 2018 MT 07 and I absolutely love it but it's H4 and the heat sink deal hangs out the back of the housing with a dust cover so no water gets into the bulb housing bit

 
1 - 13 of 13 Posts
Top