Yamaha R6 Forum: YZF-R6 Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Ok i have a strange problem here, i installed an integrated tail light, everything is hooked up fine however when i start the bike the running lights turn off, still have flashers but loose the red, when i turn the bike of but have ignition on the lights work fine!! Any ideas ??
 

·
08 in the crate
Joined
·
344 Posts
Pull the connection off the bike and wire to the battery. Is it a plug n play taillight or did you have to splice in? Sounds like something is shorting when the bike is running. T
 

·
Screw 4 wheels
Joined
·
142 Posts
Or it could be because you didnt buy anything from tripage!
 

·
Registered
Joined
·
16 Posts
some more info that may be helpful in troubleshooting this.

there are no resistors installed(didnt receive any) but the bike had other aftermarket turn signal ont hem (non led) which also made the bike blink fast

also installed flush mount LED turn signals up front too. They are wired to run as running lamps and blink properly with the turn signals. Just the damn brake light i cant figure out.
 
1 - 5 of 5 Posts
Top