[cobra390t]

In the process of building a race bike out of 2001 R6 with Carb Choke cable coming from Carb and connect inside the Left Handelbar Controller .

I would like to remove the housing as i do not need the horn, turn signal ..etc . However removing the assembly will leave the choke cable not connected .


Is there after market small housing for the choke cable end Only. Or there is a way to modify this ..all input greatly appreciated

 

[cobra390t]

Thank you for posting these links .. I also came across pretty interesting part that will work with the stock Choke cable and mount to the clip on


http://www.powersportsuperstore.com...er-Assembly-0550845-p/4136200.htm?Click=35177

 

[cobra390t]

Now for my next fat shaving ... Need to remove the right clip on control and build a simple push & toggle switch ( Star , Shut off ) .And upgrade the throttle cable to motion ..
pro