Yamaha R6 Forum: YZF-R6 Forums banner

1 - 1 of 1 Posts

·
07 Blue R6
Joined
·
222 Posts
Discussion Starter · #1 · (Edited)
Hey guys, just showing a really easy mod I did for my license plate light. I have an integrated tail light and fender eliminator. I got a 4" led strip from autozone (Pep boys has the same one probably). It came in a pack of two but I only used the one. It is bright white. I stuck the wires up through the original fender license plate holder. I hooked it up to the running lights that was under my rear seat that wasn't being used. If you're putting this in or something and don't know or can't find where that is just tap into your turn signal running lights for the tail light. Look at some of the pictures. It looks really good from behind and further away. It's bright white which makes it a little blue tint and matches my bike in a way. I figured there probably a ton of these out there, but here's my way of how I did it. ImageUploadedByMotorcycle1392166271.652300.jpg ImageUploadedByMotorcycle1392166285.937497.jpg ImageUploadedByMotorcycle1392166297.367753.jpg ImageUploadedByMotorcycle1392166308.551496.jpg ImageUploadedByMotorcycle1392166322.001257.jpg


Sent from Motorcycle.com App
 
1 - 1 of 1 Posts
Top