Yamaha R6 Forum: YZF-R6 Forums banner
1 - 11 of 11 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
2005 R6

Well it wasn't the bulb, it wasn't the relay, what I found was that the connection between the connector to the light and the low beam relay has an open on the one side of the wiring. Any idea's?

Could it be just the wiring between the relay and the bulb?
If so how the hell woudl that of happened, and how the hell do I dig into the front end of that bike?

Anyone have a link to a 2005 owners manual? I shall google it in the mean time.
 

·
Registered
Joined
·
13 Posts
Discussion Starter · #3 ·
no what i meant was that the low beam only works on one side.
Tested it with a multimeter and everything up to the point of the relay is fine.

tested between the bulb and the relay and the circuits open on one side.

how could the wiring to the low beam on one side have went awry?
And how the heck do i take apart the rest of the front end and headlight assembly?
 

·
pin it to win it
Joined
·
8,080 Posts
Lolz
 

·
Official Noob Greeter
Joined
·
55,856 Posts
:bowroll

This motherfcuker.....
 

·
Stunt Rider
Joined
·
7,982 Posts
in the butt hole
 
1 - 11 of 11 Posts
Top