Yamaha R6 Forum: YZF-R6 Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hey guys, I gotta 2008 Yamaha-r6 and I just installed vortex lowering links, lowering the bike 2 inches. I asking for help in lowering the front end an inch. Please DO NOT GIVE ME THE "LOWERING THE BIKE MAKES IT NOT WORK RIGHT OR CORNER RIGHT" I'm not looking for an opinion. I'm hoping someone can give me a step by step on how to lower the front end by one inch as thats what they do in the shops and the shop recommends. Also if you can take a photo or name the parts i need to loose that would help.
 

·
Mr. HER6
Joined
·
2,075 Posts
Loosen the triple clamps and the clip-on clamp and just slide the fork tube up. Simple as that.

Make sure to do one leg at a time or you'll be back posting about your new problem and will deservedly get nothing but sarcastic replies making fun of you. :laugh
 

·
Stunt Rider
Joined
·
7,950 Posts
Hmmm. I wonder if there are any other threads on this topic?
You know..... I was thinking the exact same thing.
 

·
Reads the rulez
Joined
·
2,247 Posts
You know..... I was thinking the exact same thing.
Come on noob, it's been covered a hundred times.

Remove fork springs.

Torch 4" off the fork springs

Re install

Boom, bike lowered the right way.

Gah, idiots.

:screwy
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top