[RSixxr]

just caulk it in place...then if you ever need to take it out you can just getcha a razorblade and cut it out.

 

[RSixxr]

ohh no not around the whole piece just the headlights. And i didnt use a bunch. Just cut a small amount off the top of the nozzle and use a small bead of caulk works great!!!!!!! :mrgreen:

 

[RSixxr]

i just sealed in the bottom part of the tiallights and left the top alone. works good. but definately don't go around the whole tail section...you'll be sorry if you do and probably have a chopped up tail section if you ever have to take it off.