Yamaha R6 Forum: YZF-R6 Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
283 Posts
Discussion Starter · #1 ·
i have a few questions,....

i have a ackro slip on ,and i'm installing two graves v-stacks and a pcIII, i't will be fine tuned on a dyno.

so my question is will i still shoot out flames when i ride??

and how much horse power will i be getting with these mods with it being fine tuned ....

p.s.--- it's a '03 r6, and i'm also using motul 5100 semi syn.

thanx in advance :cheers
 

·
Registered
Joined
·
283 Posts
Discussion Starter · #2 ·
pleazzzzze ,.. someone help a brother out...... :cheers
 

·
Registered
Joined
·
4,156 Posts
you might shoot flames but if its tuned right, you prolly won't cuz you won't be feeding your engine extra fuel when not necessary. the flames are a result of unburned gasses being burnt again in the exhaust pipe.

my guess is 3-5 RWHP with those mods. don't forget on a bike that is about 360 lbs, thats a big gain. even with rider on it.
 

·
Registered
Joined
·
283 Posts
Discussion Starter · #6 ·
they sure are , nice and BIG!!! :boob

thanx PEN .!!!!

i will post my bhp when i get all this done , going to have to wate t'ill april!!

:comp
 

·
Registered
Joined
·
4,552 Posts
Hopefully I will be able to my bike dyno'd in a couple of weeks. My dealer gave me a certificate for a free dyno pull at Dynojet center. Now I have to see if any in my area will accept it.

Mods at that point will be PCIII, K&N, 2 Graves V-stacks and a Jardine slip-on.
 
1 - 7 of 7 Posts
Top