Yamaha R6 Forum: YZF-R6 Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
132 Posts
Discussion Starter · #1 ·
Hi guys, anyone with a digital cam and a pre-03-04 that can get me a few pics of the clutch cover, in particular I am looking at the pull lever position and the clutch cable. When I installed mine after I got it back from the chrome shop, I followed the instructions in the manual and aligned the punch hole with the arrow on the clutch cover, but once I install the clutch cable, I cannot seem to get the slack let up without having to crank everything to the stops. I followed the book instructions to adjust the clutch free play at both the lever and the engine side but I am at both the limits and the pull lever seems like its not right. Thanks for the help guys. This is the last few things before I get the thing running once and for all.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top