Yamaha R6 Forum: YZF-R6 Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hello everyone. I bought my new 08 R6 Black back in April and got a lot of the accessories I wanted thrown it with the deal. Only problem was they wanted to charge me $400+ to put them all on. Well I said to hell with that, but unfortunately I have no idea how to install this stuff. Just thought I'd check and see if I could get some easy install tips for the fender eliminator kit and the flush mount front turn signals. I also have the small LED turn signals for the FE Kit so I need to put them on there and do the wiring up right as well. Anybody out there that can help?
 

·
Mr. B (Florida Boy)
Joined
·
1,533 Posts
Dude MOST of that stuff is relatively simple w/ your bike tool kit and some electrical tape/heat shrink (to protect your wire splices)
You should dig into it all first man. There is a small how to section in here somewhere! It's all pretty simple...just remember how everything came off so it can all go back on w/o having leftover bolts :lmao
 
1 - 4 of 4 Posts
Top