Yamaha R6 Forum: YZF-R6 Forums banner

1 - 19 of 19 Posts

·
who you finna try?
Joined
·
238 Posts
Discussion Starter · #1 ·
Hi, I just bought my 07 r6 today. The problem is there is no lights, header lights aren't turning on, tail lights, and rpm/mileage/speed background isn't coming on.

However, the flush mounts are working.

How can I fix this? I will buy the header bulbs, but not sure about the others.

Please help me, thanks!
 

·
who you finna try?
Joined
·
238 Posts
Discussion Starter · #3 ·
So its the fuses? Okay, thats for helping me out, I'll buy some tomorrow! Does this include header lights? Cause I was told HID lights die fast.
 

·
who you finna try?
Joined
·
238 Posts
Discussion Starter · #7 ·
No, they are HIDs, they have the red line thing right under the bulb.
I just checked again and the tail light is working, so its just the head lights and the dash.
 

·
190rwhp......:eek5
Joined
·
10,295 Posts
Who ever told you HID bulbs die fast is an idiot...
 

·
who you finna try?
Joined
·
238 Posts
Discussion Starter · #10 ·
No, its actually grey/black :D

I was going to buy the red one, but this one was a good price with many mods.

Mind helping me out on how to get the the fuse box?
 

·
Registered
Joined
·
5,244 Posts
remove the 2 allen screws that hold the inner fairing piece on the clutch side. Then gently pull up as there is another mounting point underneath in a rubber grommet.

wierd the fuses wont let the light comeon. I had to pull the relay to turn them off.
 

·
who you finna try?
Joined
·
238 Posts
Discussion Starter · #12 ·
It was the fuses! They were 15's and blue in color, I replaced them with red 10's.
Will this affect anything?
 

·
who you finna try?
Joined
·
238 Posts
Discussion Starter · #14 ·
Yeah.. the lights worked for couple of hours, then stopped again. Checked the fuses, they are fine. So I need to check the wires now?
 

·
Registered
Joined
·
1,592 Posts
Thats weird. Im thinking you may have a rub-through causing a short some where
 

·
who you finna try?
Joined
·
238 Posts
Discussion Starter · #17 ·
Wait a minute.. Our headers are supposed to have lights on them??

DAMN! I think mine are out too!!
English wasn't my first language, I'd think you would make mistakes talking in Russian :)

Anyway.. I switched the fuses around, shuffled them, to see if I have luck, and surprisingly it worked. Hopefully it stays this way!

If not, I'm going to take it to a bike shop to have it taken a look at.
 

·
i want 2 ride......NOW!
Joined
·
361 Posts
dude take the 10's put and put in new 15s's.... do mess with that stuff man

the 10's will go out

and dont go over 15's, you WILL fry stuff
 

·
Registered
Joined
·
167 Posts
you could put a inline fuse for your hid's so they dont blow the ones on the bike. Thats what I had to do with my halo kit.
 
1 - 19 of 19 Posts
Top