Yamaha R6 Forum: YZF-R6 Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
108 Posts
Discussion Starter · #1 ·
So this weekend I was reinstalling an oem chain after being cut and I ran into some issues with the master link. Initially I figured I could just use another DID 525, considering the oem is a "DID V8". I had a "ZVM-X 525" that seemed to be way too tight trying to get the rivets through the chain (not actually mushrooming them- just assembling). So basically I ended up using a BikeMaster BMOR 525 master link, with the DID O-rings. The link is still kinda tight compared to the other links and I haven't even pressed the rivets yet. So the question is- is there an oem replacement link?
 
1 - 2 of 2 Posts
Top