[ichibon_kokojin]

After looking all through the forum and talking with folks on the streets....
Pazzo levers seem to have all the buzz so I picked up a set.

Here are my thoughts during innstallaion and after riding for a few days.

http://www.pazzoracing.com/

I always shop and end up buying from http://www.motomummy.com/store/product.php?productid=16137&cat=357&page=1

 

[ichibon_kokojin]

At first glance these little ladies are clean and sleesk looking... I remember thinking to myself "DAMN these are going to look good with this Canddy red."

And lite too.

I went wen the Shorties > GOLD > Red adjuster.


Stock levers should be banned...

 

[ichibon_kokojin]

The front break lever went on without a hitch.
*** Instruction were not needed.
*** you will need more than the smig of grease that is supplied...

I will say the lining the dimple up to the plunger proved to be.... EASY for a blind man.

 

[ichibon_kokojin]

The clutch lever required a little more effort, yet it was still a straighht forrward innstallation.

**** be careful not to break the little switch on the bottom side of the the bracket...

 

[ichibon_kokojin]

The finished look was very nice indeed....

The shorties is the only way to go if you have long fingers. :YEA

 

[ichibon_kokojin]

The Fit, the Look, and now the Feel....

The positioning and feel ofthe levers were much better than I expected. usually if it looks good.... well yo know what I am gettinng at.
However these little ladies feel good to the tips... I am really impressed.
The flat millinng on top lets the fingers set right nice between the first and second joints.

Now the lever action is way better than stock, however ball bearing would be much smoother. I Jam skate and I ride on Swiss Ceramic bearings... the extraa money is worth the peformance. Let's face it another 40 bucks after spending close to 100 bucks a lever..... to get glass action.

End ball positioning hits the third finger, but that is not the real rub. the channel that was cut to save weight is what does rub "your finger." The ball end should be rolled/bent slightly forward to allow clearance and a more gentle touch on that third finger.

All in all I am good to go and highly recommend these levers for an OEM replace part.


Post yor Pazzo lever color mix.opcorn:

 

[virtualbong]

I will be picking mine up just in time for my track day on July 16th. Looks good!

btw. how long are we talking for install?

 

[J-Dizzle]

The finished look was very nice indeed....

The shorties is the only way to go if you have long fingers. :YEA

Looks awesome, man! Thanks for the how-to. I just ordered the same gold Pazzo shorties with the black adjuster, though. Btw, what brand of dampener is that?

 

[mmench]

Looks awesome, man! Thanks for the how-to. I just ordered the same gold Pazzo shorties with the black adjuster, though. Btw, what brand of dampener is that?

lol i was gona ask that too. anyways looks awesome man and im about to order a set of gold shorties in the morning

 

[J-Dizzle]

lol i was gona ask that too. anyways looks awesome man and im about to order a set of gold shorties in the morning

I figured out that it is a Hyperpro Dampener.. thanks anyway, though!

 

[mmench]

kool.. i shoulda guessed that.. he has the hyper sticker on his windscreen.. duh lol

 

[T-1]

At first glance these little ladies are clean and sleesk looking... I remember thinking to myself "DAMN these are going to look good with this Canddy red."

And lite too.

I went wen the Shorties > GOLD > Red adjuster.


Stock levers should be banned...

I think I'd ban those stock turn signals you've got long before I'd ban my stock levers..Just my opinion though.

T1

 

[ichibon_kokojin]

I think I'd ban those stock turn signals you've got long before I'd ban my stock levers..Just my opinion though.

T1

Turn sigs are banned... put the hotbodies in last night...:YEA

 

[ichibon_kokojin]

Pic for the onlookers....
NOTE this suckers are nothing to braggg about..

No running lights either. I will be gettinng the Gregs customs soon.