Yamaha R6 Forum: YZF-R6 Forums banner
1 - 5 of 5 Posts

·
R-Sex
Joined
·
422 Posts
Discussion Starter · #1 ·
Yo guys!!

I know theres tons of threads about these goin around on here so i figured id throw out there what i did with mine. I'm not too big on all the fender eliminators out there or anything, i like to keep my things simple and clean. i used an "L" bracket that i mounted underneath the battery and bolted the plate to that. i bent the lip of the plate a little bit to kind of go with the body lines. since the pics, ive cut the plate bolt shorter and painted the mount and bolts black to go with the bike. theses were pics from when i first did it. As for the pegs, i dont use them too much so i figured id fab up a lil somethin instead of keeping the tail with 2 more holes in it. I took some wire mesh that i painted black and cut it to fit the inside clips and mounts. couldnt see myself paying the crazy amount of money for the peg blockoffs so i did this. it may not be the best looking, but i like it. lemme know what you guys think or if you have any other cheap ideas that would work/look any better. thanks
<a href="http://s221.photobucket.com/albums/dd97/bignbad151/?action=view&current=2-1.jpg" target="_blank"><img src="http://i221.photobucket.com/albums/dd97/bignbad151/2-1.jpg" border="0" alt="Photobucket"></a>
<a href="http://s221.photobucket.com/albums/dd97/bignbad151/?action=view&current=4.jpg" target="_blank"><img src="http://i221.photobucket.com/albums/dd97/bignbad151/4.jpg" border="0" alt="Photobucket"></a>
<a href="http://s221.photobucket.com/albums/dd97/bignbad151/?action=view&current=5.jpg" target="_blank"><img src="http://i221.photobucket.com/albums/dd97/bignbad151/5.jpg" border="0" alt="Photobucket"></a>
<a href="http://s221.photobucket.com/albums/dd97/bignbad151/?action=view&current=6.jpg" target="_blank"><img src="http://i221.photobucket.com/albums/dd97/bignbad151/6.jpg" border="0" alt="Photobucket"></a>
<a href="http://s221.photobucket.com/albums/dd97/bignbad151/?action=view&current=7.jpg" target="_blank"><img src="http://i221.photobucket.com/albums/dd97/bignbad151/7.jpg" border="0" alt="Photobucket"></a>
 

·
This is not my ass
Joined
·
1,355 Posts
Looks fine, but I have a plasitic bracket with about a 120 degree bend in it, bought it that way has LED lights on it too. bolts up in the same location as yours. I also have no rear pegs, integrated tail light, clean look, looking to put an under tail piece with no hole in the near future, I like the mesh idea. The under tail piece: http://www.tobefast.com/catalyst-yamaha-r6-undertail-c-55492-p-1-pr-4961.html
 

·
R-Sex
Joined
·
422 Posts
Discussion Starter · #3 ·
i actually want to keep the undertail with the peg holes in it just in case i come across a girl thats worthy enough of riding on the back of it. over next winter im going to fiberglass the original bracket mount holes so i have a nice clean look underneath as well.
 

·
R-Sex
Joined
·
422 Posts
Discussion Starter · #5 ·
hahaha, not top on my list of things i wanna do right now. once they come, the savings goes, and i want to much stuff for my bike at the moment. haha

back to the thread, is anyone else using something any better looking than the mesh that im using and the actual peg block-offs? i'd definately like any input or suggestions. thanks
 
1 - 5 of 5 Posts
Top