Yamaha R6 Forum: YZF-R6 Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
i just bought an r6 recently. after i bought it however i noticed that the inside part of the fork ( the blue part, one was higher than the other. ), was uneven. the handling is kind of different than my friends r6. but i thought it was because the tires are unevenly worn. can that part of the fork effect the handling of my r6? if so, any suggestions how i can fix it. thank you any help will do good.
 

·
Registered
Joined
·
19 Posts
Discussion Starter · #3 ·
mine is a 2000 r6. yea i think it is an offset. it looks adjustable ( the middle part of the fork. ) the right fork is about 3 lines above the left fork. thank you. is there anyway you can adjust the middle part of the r6?
 

·
Registered
Joined
·
19 Posts
Discussion Starter · #7 ·
ok that is it. one of the blue part of the fork is higher. alright then i have one more question. is there a recomended of how the settings should be? thanks for your help man.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top