Yamaha R6 Forum: YZF-R6 Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Hello guys
i took the engine of to adjust the timing and when i put it back on after i connected the wiring harness to the motor i accidently plugged the battery backwards. the main 40amp fuse blew replaced it but the engine wont turn
and the dash doesnt get any power.

did i fry the computer?? :(

Any help is greatly appreciated.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
its an 05 r6 by the way
I also painted the frame and fairings so i fiuger might as well do it when the engine is of. But is there something that would fry before reaching the computer?
 

·
Registered
Joined
·
4 Posts
Discussion Starter #5
My main fuse was blown and i replaced it. But no power to ignition nor tank. I went ahead and bouth an used ecu and some realay and it still didnt work. my dash gets some power but only the blinker lights work. and the horn. What i noticed is that the air cut of valve thats on top of the head cover gets really hot i checked it with my meter but there is resistance i just dont guet why there is no power to almost anyting. not even the brake lights work.:confused:
 
1 - 5 of 5 Posts
Top