Yamaha R6 Forum: YZF-R6 Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hey guys. So I'll be getting my Power Commander in the mail either today or tomorrow and I had two quick questions...

(1) I have a 2007 R6S with a Yoshi TRS carbon fiber slip on and a K&N Air filter, they don't have a map for that setup on the dynojet website but I did notice they have a setup for those mods on a 2003 R6. Can I load that map and would it work? It wouldn't hurt anything would it? (2) Also I was wondering if it would work to just load a map with the SIMILAR but not the EXACT mods like the "Graves Motorsports standard slip-on exhaust and stock or aftermarket air filter" or the "Level One Racing slip-on, Stock or aftermarket air filter"?

Any help would be greatly apprecated. Thanks again, Lance.
 

·
Just Burnin Time
Joined
·
2,219 Posts
I would load one for your year with a similar set up. If it runs bad, try another one.
 
1 - 2 of 2 Posts
Top