Yamaha R6 Forum: YZF-R6 Forums banner

1 - 20 of 518 Posts

·
flyin' hawaiian
Joined
·
2,815 Posts
you have 3 choices.

1-use the micron slip-on map because it had the same settings as the one posted for the blue flame map..

2-try another slip on map such as the yoshimura, m4, graves slip on maps. you will have to experiment with these.

3-get a custom map made at a dynojet tuning center or any other place with a bike dyno and dyno jet software. its not cheap. but you get a custom made map specifally for your bike. with everyone living in different elevations, barometric pressures, and temperatures all these make a big difference in your engines ability for peak performance.

i say go with number 3. you wont have to worry about your bike running too rich or too lean.
 

·
5/8/10 - NES BBQ V
Joined
·
3,215 Posts
Does anyone have a Map for an 04 r6 with a Devil slip-on and a K&N?
 

·
Registered
Joined
·
4,552 Posts
Did you already buy a PCIII?

If not, you don't really need one for just a filter and slip-on. The bikes come from the factory rich as it is. Take it to a dyno and see where the A/F ratio is and that will tell you if you really need one or not.
 

·
5/8/10 - NES BBQ V
Joined
·
3,215 Posts
no, i'm preparing for it. After i buy the damper I'm gettin a PCIII. By this time next year the bike WILL be bad ass....Then i'll probably sell it like a moron.
 

·
My 6 makes me super horny
Joined
·
140 Posts
I just took mine to the dyno today... leaned it out some and got another 4 Hp out of it.
 

·
Registered
Joined
·
642 Posts
Im in desperate need of a map for an 05'. I wanna get a custom map, but i gotta leave the bike for a few days. WTF. Don't really like that.
 

·
Registered
Joined
·
10 Posts
Hi,
Any one have or know where to get a map for
R6 2005 (european), Akrapovic full race, factory v-stacks, iridium power plugs, K&N filter.

I need something to use before I can get a custom map made.


Thanks,

Antti
 

·
Eliminating Chickenstrips
Joined
·
1,566 Posts
I need a map (because I already ordered the PCIII) for a D&D slip-on and a filter.

My idle is horrible bouncing up and down so I wanted something to even it out.

UPDATE: The graves map worked quite well. Now it's almost time to put the bike away.
 

·
Registered
Joined
·
9 Posts
hi i am looking for a map for an 05 model, with akropovic carbon fibre slip on.
i am from australia, so does that mean we have the european model?
 

·
turn-burner
Joined
·
248 Posts
Any1 know what's close to two bros? I need a map for the slip on and a BMC race filter with 2 slide stops. any1 live in/near CT? I'd really like to get it tuned right, but don't know anywhere to go...
I HATE SNOW...
 

·
I eat R6s... 07 R1
Joined
·
323 Posts
looking for a MAP!

03 r6
devil carbon sb2 high mount slip on
graves slide stops
graves fuel pressure booster
factory pro v-stacks pro
bmc race filter
+4 ignition advance
pc3

im really looking for a map for my bike but havent had any luck, need HELP!
 

·
Registered
Joined
·
59 Posts
saltysteve said:
03 r6
devil carbon sb2 high mount slip on
graves slide stops
graves fuel pressure booster
factory pro v-stacks pro
bmc race filter
+4 ignition advance
pc3

im really looking for a map for my bike but havent had any luck, need HELP!
I have an '04 with pretty much the exact same mods as you except I got a titanium SB2 HM and Graves v-stacks. Anyways, I got a map from a local racer with the same mods excluding the ignition advancer (that won't matter) and he ran a Micron HM can instead. I just got it this winter so I haven't had a chance to run it on the street yet. Give me your e-mail address and I can send it to you but make sure you post back with how it runs cuz I'm curious how this map would work with our mods.
 

·
Registered
Joined
·
59 Posts
saltysteve, check your e-mail - post back with your impression of the map when you get a chance to test it out.
 

·
Registered
Joined
·
190 Posts
Saltysteve, will you please forward the map to me. I am in the process of getting these exact mods. Good choices btw!

Thanks in advance :cheers
 

·
Registered
Joined
·
59 Posts
cableguy said:
Saltysteve, will you please forward the map to me. I am in the process of getting these exact mods. Good choices btw!

Thanks in advance :cheers
Not sure if saltysteve passed the map onto you but if he hasn't post up your e-mail address and I'll send it to you. All I ask is you post back your impressions of the map. I just put the map in but can't ride yet since it's still winter :(
 
1 - 20 of 518 Posts
Top