Yamaha R6 Forum: YZF-R6 Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
94 Posts
Discussion Starter · #1 ·
If I want to have both sides of the headlights running a low beam and when I switch on the highs, to have both sides lit up on high beams what kit do I need? I found one on ebay that comes with 2 slim,digital ballasts and two bulbs and says it is good for high and low beams. Does this mean that both sides are lit up while riding? Or . . . do I need to by two of these kits to have a total of four ballasts so that there are four bulbs running to the batterey. Two lights on at a time. . . of course. Hopefully this is not confusing.

I have seen bikes on the forum that have both sides lit up and I am not sure how to do this myself. If someone could help me figure this out I would appreciate it.
thanks:cool:
 

·
Registered
Joined
·
94 Posts
Discussion Starter · #2 ·
Anyone? ?:sing
 

·
Registered
Joined
·
351 Posts
You will need to by the conversion kit. do a search in the "Appearance" forum.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top