Yamaha R6 Forum: YZF-R6 Forums banner

1 - 13 of 13 Posts

·
Registered
Joined
·
1,877 Posts
Discussion Starter #1
I've bought fiberglass fairings for my 2002 and did a test fit.

After installing the tail, I realized the tray is now exposed from the bottom. With stock fairings, this would be covered by an undertail.

So my questions are, is this alright to have exposed?

If it isn't, do I just fab up a rectangle fiberglass piece to cover it? I've never really looked at a race bike's undertail

Here is a pic for reference:

 

·
Registered
Joined
·
1,940 Posts
That bike doesn't come with an aftermarket "draft pan" as far as I know. You'll be fine as long as your battery tray is in tact.
 

·
Registered
Joined
·
102 Posts
You're fine with it the way it is and your choice if you want to fab something up to make it look the way you want. With it being a flat square it wouldn't be hard to fab up a fiberglass insert using Dezus fasteners to hold it in place and easily taken on and off.
 
1 - 13 of 13 Posts
Top