I have a 2002 R6 and I have the front blinker in hand. It has a red wire, black wire and a black with white stripe wire coming out of it. These wires plug into the wiring harness but instead of red, black and B/W the harness has a blue(running), black(GND) and brown or green for the signal . I looked in the Clymer and the wiring diagrams didn't show the red,B,B/W so does anyone here know how to connect these bullet connectors up. So what do the red, black and B/W connect to the blue(running), black(GND) and brown or green?