Yamaha R6 Forum: YZF-R6 Forums banner
1 - 1 of 1 Posts

· Registered
9 Posts
Discussion Starter · #1 ·
This is my first post here, thought I would start off with my first mod to my newly acquired '99 R6. Nothing major, just mounting the RAM GPS Mount for my Garmin 60CSx.

Here's the bike:

The rubber in the kit was too small so I decided to just cut a hole in the top center of the yoke nut, put a washer and lock washer on the back side, and I cut down the actual mount so it wasn't so tall. Ordinarily this would be done with a yoke nut without the cap, but I had to MacGuyver it since the rubber inserts in the kit were too small. Here it is:

It's really nice for loading tracks for rides in places I have never been, easy to follow and does store some cool data on road trips.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.