Yamaha R6 Forum: YZF-R6 Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hey everyone,

So l am planning on doing the JLD7 tail light and indicator setup on my 2020 R6 and l was wondering if anyone knows where l might be able to buy the stock harness connectable plugs from. Most people it seems either cut their stock indicators plugs off and just spliced into that or directly into the harness however here in Australia we have situations that require stock setups to be reinstalled so l am hoping someone here might have any ideas. Even if you guys know an aftermarket indicator l could buy and cut just for the plugs that would be helpful too!

Ill add some photos of the stock plugs l am talking about for reference :)

Cable Gadget Bag Wire Musical instrument accessory

Hood Automotive tire Automotive design Bicycle handlebar Bumper
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #4 ·
For my generation bike, there are a number of individual harnesses back there. The prior owner had hacked-up much of the wiring back there. So elected to gather up all the individual harnesses and combine them into one.
Oh man l would do that if l was fully committed to stripping all the plugs.
 
1 - 2 of 2 Posts
Top