Yamaha R6 Forum: YZF-R6 Forums banner
1 - 18 of 18 Posts

·
mhmmmm
Joined
·
56 Posts
Discussion Starter · #1 ·
Does anyone have some close up pics of where the ends meet i can only find pics from far away and i dont want to it to look off..
heres my bike

i either want gold or black from tape works
 

·
mhmmmm
Joined
·
56 Posts
Discussion Starter · #6 ·
Ya mine are paint but i figure i can just change the color by applying rim tape over it, i have never liked the red
 

·
DARC Racing
Joined
·
2,334 Posts
here is as close up as I have... Mine are the OEM red also and I bought some pin stripe at a local paint shop in a slightly wider width. I over lapped the end just slightly to prevent any shrink or pull back of the tape.... To keep it stright, I followed the OEM stripes inner edge with the new tape....





 

·
Pigs can fly!
Joined
·
1,160 Posts
You just overlap one side slightly over the starting point, stay with the curve.. don't start a new line. Not that difficult :sing
 

·
blue on blue
Joined
·
327 Posts
this is what i did, i get complements on the yamaha logo all of the time.
 

Attachments

·
Premium Member
Joined
·
616 Posts
Don't worry if it is a few inches off :secret. my tape is 2" off in different places :lmao

 
1 - 18 of 18 Posts
Top