Yamaha R6 Forum: YZF-R6 Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter · #1 ·
First of all,

Big Thanks to Motomummy Corey and team on the exhaust and the pciii.

Installed:
K&N Filter
New spark plugs
Akrapovic Full Exhaust (Evo) Full Titanium
PCIII - Using the map from the PC website

Everything looks fine, but running quite rich.
Back fires most of the time whenever I let the gas off in second gear (high rpm)

I don't think there is a "good" tuner in town (in Hong Kong), so not confident to get it tuned by anybody...

Any solution/suggestions guys?

Thanks.
 

·
Registered
Joined
·
27 Posts
Discussion Starter · #3 ·
How hard is it to tune such a bike with a power commandar??

i can find a place that can get me to a dyno with air/fuel ratio showing...
how hard would it be to tune it with the PCIII?

also, what's the risk of actually losing more power?? or running lean??
 

·
R-Sex
Joined
·
422 Posts
there are some custom maps that are downloadable right off power comanders website, you could grab those and play with them a little bit. also there is a ton of gurus on here that can help lean out the a/f ratio. throw up some of your numbers/maps on here or in another post and see if you cant get some help.
 
1 - 4 of 4 Posts
Top