Yamaha R6 Forum: YZF-R6 Forums banner

1 - 5 of 5 Posts

·
06 Raven R6
Joined
·
378 Posts
Discussion Starter #1
So I finally got my solid led ring halos made with the third eye mod and now I need to wire them up.

Here's how I've got it wired: The stock low beam wire wired to the halos and third eye, and both headlights wired parellel to the stock high beam wire.

Here is my question: Is wiring both headlights up in parellel to the high beam wire going to be too much / melt the wire? :confused:
 

·
MACGYVER 05 R6 NJ
Joined
·
4,033 Posts
So I finally got my solid led ring halos made with the third eye mod and now I need to wire them up.

Here's how I've got it wired: The stock low beam wire wired to the halos and third eye, and both headlights wired parellel to the stock high beam wire.

Here is my question: Is wiring both headlights up in parellel to the high beam wire going to be too much / melt the wire? :confused:

It may. Use a car foglight relay and use the highbeam wire to power it on/off.
 

·
06 Raven R6
Joined
·
378 Posts
Discussion Starter #4
It may. Use a car foglight relay and use the highbeam wire to power it on/off.

Ok so how would I wire that up? I assume wire the power strait from the battery and wire the signals to the headlight wire itself...

yeah and how big of wire would I need to draw 120watts.
 
1 - 5 of 5 Posts
Top