Yamaha R6 Forum: YZF-R6 Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter #1
on my 00 r6 i have a pearl paint job basically white with heavy blue flake, anyway its a really nice expensive paint job. i got frame sliders but i am afraid my paint is gonna chip if i drill them out myself anyone have any advice on the process?
 

·
Registered
Joined
·
326 Posts
Re: scared to **** up paint doing it myself

drilling the holes for the frame sliders to fit through the fairing right?

if so, mask off with masking/painters tape where u will be drilling the hole for the slider, drill slow and it want chip up the paint...
 

·
Registered
Joined
·
2,472 Posts
Re: scared to **** up paint doing it myself

best shot you have at not chipping the paint was already stated. Tape off the area w/ masking/painters tape and drill slowly through it. Start with a small pilot hole and go bigger from there.
 
1 - 5 of 5 Posts
Top