Yamaha R6 Forum: YZF-R6 Forums banner
1 - 9 of 9 Posts

·
Focus
Joined
·
728 Posts
Discussion Starter · #1 ·
Hey everyone, I was looking at purchasing a stabilizer, finally, and came across a couple here.

http://cgi.ebay.com/ebaymotors/SCOT...003QQitemZ130222403122QQrdZ1QQsspagenameZWD1V

http://cgi.ebay.com/ebaymotors/SCOT...003QQitemZ130222409458QQrdZ1QQsspagenameZWD1V

One for a 06-08 R6 2 bolt, and another for a 06-07 R6 1 bolt. Both listings have the same description, not a whole lot of help, neither was the response I received from their store. I have an 06 R6R, just need to know which one to go for. Thanks!
 

·
08 Yamaha R6
Joined
·
3,057 Posts
I would make sure with the seller, but I have an 08 with the scotts damper, and the front cover on my tank has a single bolt that holds it down. So for the damper rod there are a total of three bolts one that holds down the tank cover, and then two bolts that are drilled into the frame. So I would assume that the 08 would be the single bolt, not sure how the tank cover is on the 06. I would say go for the one listed for the 06-07 if the one in the pic looks like it would fit, because the 08 does not look like the one in the pic.
 

·
Focus
Joined
·
728 Posts
Discussion Starter · #5 ·
This is what they said, helpful enough to tell me that there is only one mount for the 06 r6r. This is what hey said...

--- On Fri, 5/30/08, Jake Hulsebus <[email protected]> wrote:

From: Jake Hulsebus <[email protected]>
Subject: RE: One or two bolt
To: "zac Blue" <[email protected]>
Date: Friday, May 30, 2008, 2:02 PM

Dear Zac,

We only have one mount for this bike. The frame bracket has a
center tank mount and two outbound mounts as well. I have attached the
instruction sheet for you to see how it mounts.

Thank You,
Jake
Scotts Performance
818-248-6747

-----Original Message-----
From: zac Blue [mailto:[email protected]]
Sent: Thursday, May 29, 2008 7:20 PM
To: Counter Sales
Subject: One or two bolt

Hi, apparently you offer two different kinds of damper kits for my 2006
R6R. A two bolt kit and a one bolt kit. My question to you guys is which
do I need to purchase. Thank you.

http://cgi.ebay.com/ebaymotors/SCOTT...spagenameZWD1V
<http://ads.auctionads.com/pagead/link_307a72a19d501ec0c5e9_faa5f385cab1
de4b6be7030c8d214e45_http://cgi.ebay.com/ebaymotors/SCOTTS-STEERING-DAMP
ER-STABILIZER-06-07-YAMAHA-R6-1BOLT_W0QQcmdZViewItemQQcategoryZ35592QQih
Z003QQitemZ130222403122QQrdZ1QQsspagenameZWD1V>

http://cgi.ebay.com/ebaymotors/SCOTT...spagenameZWD1V
<http://ads.auctionads.com/pagead/link_307a72a19d501ec0c5e9_faa5f385cab1
de4b6be7030c8d214e45_http://cgi.ebay.com/ebaymotors/SCOTTS-STEERING-DAMP
ER-STABILIZER-06-08-YAMAHA-R6-2BOLT_W0QQcmdZViewItemQQ_trksidZp1638Q2em1
18Q2el1247QQcategoryZ35592QQihZ003QQitemZ130222409458QQrdZ1QQsspagenameZ
WD1V>
 

·
08 Yamaha R6
Joined
·
3,057 Posts
so.... you have to drill the frame for the two outboard mount bolts, right?
Yeah the damper comes with a punch, drill bit, and tap. It is really easy to install.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top