Yamaha R6 Forum: YZF-R6 Forums banner

1 - 6 of 6 Posts

·
WTF Over
Joined
·
36 Posts
Discussion Starter #1
So I am wondering if its possible to remove the shock without buying the special pit bull bike holding brackets that fit under the pegs? Any ideas?
 

·
Registered
Joined
·
2,889 Posts
Stock rearsets on my bike here:



Note where the jack stands are though, as I moved them as soon as I could. If you look closely you'll notice they are actually under the frame. I have a thick rag between them and the frame, but it was a lot more stable that way.
 

·
Registered
Joined
·
90 Posts
have fun, if you've ever pulled the shock off a 08+ R6 is a PITA. When you pull it out have the nut on top captive tack welded to the bracket to make the install muchhhh easier. Also, you can drill a hole in the subframe or grind part of it down for the bolt to slide in and out.
 
1 - 6 of 6 Posts
Top