Yamaha R6 Forum: YZF-R6 Forums banner
1 - 11 of 11 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
how come no one offers this for the 99-02 1st gen r6's? I know HR1 has one for the 2nd gen. The only thing that I can see that would impede it is the exhaust hanger, but you can just remove that. I'm thinking about just cutting mine off and custom fabbing the 07-08 exhaust or a shorty gp style slip ons from later generations onto it. Any ideas? Thanks
 

·
Motorcycle Drive By
Joined
·
791 Posts
do it. its easy on an 04
'06-'08 stock exhaust or a slip on for those years? I've seen the stock done, but slip on might be a little loud.

If you did it with a slip on, what did you use?
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #4 ·
'06-'08 stock exhaust or a slip on for those years? I've seen the stock done, but slip on might be a little loud.

If you did it with a slip on, what did you use?
I've seen many stock and slip ons on the 2nd gen, but never the 1st gen. I'm going the cheapest route
 

·
fun and informative
Joined
·
560 Posts
i had the gytr shorty on my 05. the clamp was good enough but i ended up taking it off. literally to loud.
 
1 - 11 of 11 Posts
Top