Yamaha R6 Forum: YZF-R6 Forums banner

1 - 16 of 16 Posts

·
Draggin knee's
Joined
·
969 Posts
lol yea. Ur slip on has nothing to do with your actual headers. just like it says,,, its a slip on. Witch basically means bolt on an slip on lol
 

·
Registered
Joined
·
115 Posts
i've looked alittle bit and haven't found just headers and midpipes for the 06-07 R6. for those that say you can buy them later what brand ,where and how much? TIA
 

·
Draggin knee's
Joined
·
969 Posts
i've looked alittle bit and haven't found just headers and midpipes for the 06-07 R6. for those that say you can buy them later what brand ,where and how much? TIA
Well, u can buy old 05 Headers off ebay or something an fabricate it to fit your new bike. Or you can go to www.mjsperformance.com and get him to change your stock headers into race headers and cut out the cat. an fabricate a midpipe an all himself for a low price.

he gets your stock pipe...


and turns it into this...


end result ....


VIDS HERE
http://www.youtube.com/watch?v=ClG-r48vmHA
http://www.youtube.com/watch?v=hE8FFMcofGc
 

·
Registered
Joined
·
115 Posts
i knew about that stuff i currently have the t-tuner midpipe. which is what that mjsperformance one is, just welded. i was asking mainly on like aftermarket headers and midpipes like what you'd get if you bought a full system minus the can or the "slip-on". if anyone knows if i can do this i'd love to get just the header and mid-pipe in a yosh. or akra. or even a m4 to go with my slip on i have. TIA
 

·
Registered
Joined
·
2,472 Posts
Most of the time the slipon from a company and the full system from that company exit at different points and won't work together. This is talking mostly about a full system with full length cans or highmounts. An exhaust with a stubby can will probably work if you can find someone to sell you just the headers, at worst, you'll have to fab up a single mounting bracket.
 

·
Draggin knee's
Joined
·
969 Posts
harrison: does he need the can too b/c mine is smashed from my wreck, hence the reason i put on a slip
U had a full system? and u wrecked? i dont understand ur question. If u want a slip on then theres no reason why u cant. Unless u already have a full system. AKA an Akrapovic full system an then u wanted to add a GYTR slip on i dont know if it will fit or work.

But if you have ur full stock exhaust an just want a slip on then...go for it.. they all should work. But headers or mjs midpipe later. no problems
 

·
Draggin knee's
Joined
·
969 Posts
it was stock, the can really became smashed, i put on an akra slip, was wondering if i can add to that slip
yea sure.. get a midpipe. or a full exhaust setup
 

·
Draggin knee's
Joined
·
969 Posts
1 - 16 of 16 Posts
Top