Yamaha R6 Forum: YZF-R6 Forums banner

1 - 2 of 2 Posts

·
Rotten Hot Sweat Balls
Joined
·
509 Posts
Discussion Starter #1 (Edited)
Noticed the other day while cleaning the grease off my swing arm, the chain guide that rest on the swing arm was wearing unevenly. This was due to to smaller roller width in the 520 chain. I modified the chain guide to work with a 520 chain (Dremel). Very easy adjustment to make.

Don't know what this part (chain guide) does for performance, but I think the chain resting on the slight angle it was on could'nt be good for sprocket wear.

Pics, put brackets around the sections of chain guide that where affected. Chain rested toward the inside of the bike, this will very based on sprocket alighment.
 

Attachments

1 - 2 of 2 Posts
Top