Yamaha R6 Forum: YZF-R6 Forums banner

1 - 3 of 3 Posts

·
ready to race
Joined
·
83 Posts
Discussion Starter #1
I have an 03 R6 that I use for track and street. Current set up I believe to be stock 18 / 48 . At Mosport I run the back straight at 240kph/14000 rpm ( could probably go a bit faster but am ok with that....bike is stock).Acceleration is awesome in 1st almost to awesome, if I open up to hard I can't keep the front down...so here is the question...I would like to get the top end rpm down a bit(approx. 1000) but also tame the wheeles a bit....part 2...on the street at approx. 130kph i'm doing 8000rpm and I need a bit lower rpm( to loud...got an 06 muffler).....what sprocket sizes would be recommended . I am running in the green group on track days so just working on technique not breaking the speed record....
thanks Ed
 

·
"The Dude abides .. "
Joined
·
4,719 Posts
http://gearingcommander.com/
go here. You can plug in sprocket sizes, and view the speeds in each gear. And stock for your bike is not 18/48, it's 16/48
 
1 - 3 of 3 Posts
Top