Yamaha R6 Forum: YZF-R6 Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
247 Posts
Discussion Starter · #1 ·
the bike i bought had an nrc statorcover installed when i got it. the bike was wrecked and i bought a factor stator cover to replace it. whoever installed the nrc cover cut the factory connector off of the wiring harness and spliced the wires together. theres 3 white wires, no markings. the bike is a 99 r6.
thanks in advance.
 

·
Premium Member
Joined
·
30,458 Posts
great news. i konw i've used my service manual MORE than a few times. in fact, i have it on my phone as well, for "on the go" references. haha.
 

·
Registered
Joined
·
2,028 Posts
I would also recommend using thicker gauge wiring then the stock white wires so you dont have any problems down the line. That is if you havent put it all back together already.
 
1 - 8 of 8 Posts
Top