Yamaha R6 Forum: YZF-R6 Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
504 Posts
Discussion Starter · #1 ·
I was just wondering if your tail light actually lights up in two phases? Like it's on all the time, I know that, but to my knowledge, it used to light up even more (brighter) when I hit the brakes. It doesn't do that anymore... I made my own rear "fender eliminator plate" and could I have screwed up any wiring??? Please help... also, my horn doesn't work... what's the deal, can they short out or something???

-Solace
 

·
Registered
Joined
·
35 Posts
most likely its loose wires or when you wired the rear you put them backwards or just small mistake. go over it again and before putting it all back together keep changing the wire setup until it works. samething with the horn, most likely just loose. that happend to mine and it was just loose.
 

·
Registered
Joined
·
504 Posts
Discussion Starter · #3 ·
But, I'm not an electrician... I don't really know what goes where, or where to even begin to look. Is there a manual, or like "red to red" I should follow? And about the horn, where is it anyways???

-Solace
 

·
Registered
Joined
·
504 Posts
Discussion Starter · #4 ·
Come on guys... needing some help over here... please...

-Solace
 
1 - 4 of 4 Posts
Top