Yamaha R6 Forum: YZF-R6 Forums banner
1 - 20 of 133 Posts

·
A work in progress...
Joined
·
13,658 Posts
Discussion Starter · #1 · (Edited)
Year:
2007 Candy Apple Red

Performance Mods:
  • Pipercross Air Filter
  • Agg Smog Block-Off Plates
  • PC3
  • Radiator Guard made by bryan j
  • NGK Iridium Spark Plugs
  • Driven 520 Sprockets (15/47)
  • EK 520 MVXZ Gold Chain
  • SpeedCell 8 cell battery
  • Stahlbus Drain Valve Kit with Race Cap
  • ECU Flash by OhioYJ
  • Samco Black Hoses with Samco Clamps
  • Graves Works 2.0 Bar Radiator Cap
  • Motion Pro Rev2 Variable Rate Throttle
Braking System:
  • EBC Double-H Sintered Brake Pads
  • Fren Tubo Type 4 Carbon Fiber Brake Lines
  • Stahlbus Brake Bleeding System with Gold Caps
  • Lightened Rear Rotor
  • SBK reservoir kit
Fluids:
  • Motul 300V 10w40 synthetic oil
  • K&N 204 oil filter
  • Motul RBF 600 Racing Brake Fluid
  • Distilled water and Water Wetter
Chassis/Controls Mods:
  • Vortex Rearsets
  • Renthal Clip-Ons
  • Kevlar Renthal Grips
  • Corbin Seat
Protection:
  • Woodcraft Shark Fin
  • Woodcraft Swingarm Spools
  • Shogun No-Cut Frame Sliders (Powder coated Hex Screws for cover)
  • Driven Axle Block Sliders
  • Woodcraft Ignition Cover with Black Slider
  • Woodcraft Stator Cover with Black Slider
  • GB Racing Clutch Cover
  • ETI Fuel Cell Sliders
  • Graves Motorsports Brake Lever / Hand Guard
Accessories:
  • Motodynamic Tinted Integrated Tail Light
  • Custom Led's Flasher Relay
  • Removed passenger pegs
  • Candy Red Passenger Peg Plugs
  • GYTR Candy Red Seat Cowl
  • 3rd Eye Mod
  • SKUR Carbon Fiber Gauge Cover
  • SKUR Carbon Fiber Tripple Tree Cover
  • SKUR Carbon Fiber Tank Protector
  • Crown Moto USA Tank Side Panels
  • Crown Moto USA Air Duct Covers
  • Carbon Fiber Swingarm Heel Covers by topherchris
  • Carbon Fiber Rear Hugger by topherchris
  • Carbon Fiber Exhaust Cover
  • 3M Di-Noc Gloss Black Carbon Fiber Vinyl on Mid-Fairings
  • R6-Forum Sock
  • Blue Yamaha Racing key chain
  • Unknown make DB windscreen
  • Unknown make FE
  • StompGrip
  • Tinted Proton Flusmounts
  • Decals by NJG Designs
  • Vortex V3 Gas Cap
  • Black Driven Sprocket Nuts
  • Bridgeport 90* Angled Valve Stems
  • Probolt Gold Oil Filler Cap
  • Frame Plugs
  • Shermoto Racing Brake and Clutch Lever
  • JDA Customs Slotted Front Sprocket Cover

I am the 3rd owner of my bike. When it was November 21, 2010, it only had the the PC3, DB windscreen, and FE. I have put over 5000 miles on it this season as of now. I am a college student and am modding it on a budget (very hard to do :thumbdown). Since I was young I have always wanted a motorcycle. It was my daily commuter over the summer and I plan on tracking it in the future. This is my first bike and first season of riding. She is my pride and joy. Thanks for looking.

I just want to catalog my build to see a before and after. This is as it sits at home under the tarp. This weekend I will be stripping her down to winterize her. This will be a very slow build until I am out of college.

At Putnamville Road Course with my buddy's R1. There wasn't much done at that point I believe.



More up to date pictures

 

·
A work in progress...
Joined
·
13,658 Posts
Discussion Starter · #3 ·
Figured I'd start one even tho it is going to be a SLOW work in progress.
 

·
Sherman Connoisseur
Joined
·
26,445 Posts
Nice bike Kevin!

Speaking of build thread I think I'm going to update mine tomorrow. Actually I think it's still stuck in general discussions! LOL
 

·
A work in progress...
Joined
·
13,658 Posts
Discussion Starter · #6 ·
Thanks Ricky!! :cheers
 

·
A work in progress...
Joined
·
13,658 Posts
Discussion Starter · #7 ·
Painting my protons and will be installing them tomorrow hopefully. Will update pictures soon. Maybe? :laugh
 

·
A work in progress...
Joined
·
13,658 Posts
Discussion Starter · #8 ·
Well, I got to go home this weekend and pick the bike up from the dealership. Never again, too much money for regular scheduled maintenance. :nono But I cleaned her up. Here's the newest pictures with the forum decal, removed passenger pegs, and tinted proton flushmounts.




 

·
Sherman Connoisseur
Joined
·
26,445 Posts
Very nice indeed! :cheers

Loving the red color!
 

·
A work in progress...
Joined
·
13,658 Posts
Discussion Starter · #11 ·

·
A work in progress...
Joined
·
13,658 Posts
Discussion Starter · #12 · (Edited)
Added some Carbon Fiber over break.

MDI Tank Side Panels
MDI Tank Cover

Ordered Crown Moto Air Duct Covers. I won't be able to install this until Christmas Break.

 

·
A work in progress...
Joined
·
13,658 Posts
Discussion Starter · #14 ·
Oh I agree. I want levers soooo bad! I need to get some money first.
 

·
A work in progress...
Joined
·
13,658 Posts
Discussion Starter · #16 ·
If you decide to go Shermoto :)YEA), let me know :popcorn:
I have already decided those when I read reviews. I'm sorry the funding is taking so long, but when I am ready you will be the first to know!
 

·
Sherman Connoisseur
Joined
·
26,445 Posts
:laugh

:popcorn:
 

·
A work in progress...
Joined
·
13,658 Posts
Discussion Starter · #20 ·
Wow, the carbon fiber looks great on the candy red Kevin! :popcorn:
Thanks Paul! Didn't see you posted in my thread. :love
 
1 - 20 of 133 Posts
Top