Yamaha R6 Forum: YZF-R6 Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
49 Posts
Discussion Starter #1
I know its been beaten to death but still can't find the answer I'm looking for...

I'm looking for confirmation on a Yoshi TRC with hotbodies belly.

I ordered Hotbodies on the 2 for 1 deal and should be getting here shortly. I've been looking for a used full exhaust in order to fit it but have read mixed reviews on exhaust/ bodywork that work well together.

I would like to have no melting...



Would like to know which full exhaust works well with the hotbodies belly on a 12' R6.

Also will the M4 y pipe work with no melting?


Thanks,
 

·
Registered
Joined
·
484 Posts
My previous experience with Hot Bodies is you'll have to almost always trim the back of the under tray to fit the canister through the body work. Not exactly sure with 08+ HB kit but I would think a full system would be fine. With non-drilled body work it's usually up to how you install it that determines the clearance of the headers as well. For instance, where the upper is mounted on the fairing stay can have an affect on the clearance of the headers since it will either pull the lower tray higher or lower.
 
1 - 2 of 2 Posts
Top