Yamaha R6 Forum: YZF-R6 Forums banner
1 - 1 of 1 Posts

·
Dan the man
Joined
·
292 Posts
Discussion Starter · #1 ·
Im havin some problems with my turn signals. My left side signals work fine but my right side signals are very inconsistent. When I push the turn signal switch to the right it engages as if the signals should turn on but they do not blink. Then, if i push in on the toggle slightly like I was going to turn them off then the signals start blinking. Through this I came to the conclusion the problem must be in the module on the left handlebar.

Ive got the module apart and Im trying to figure out how the toggle-type switch works. Anybody had a similar problem or have any experience messing with this switch?

Thanks,
Dan
 
1 - 1 of 1 Posts
Top