Yamaha R6 Forum: YZF-R6 Forums banner
1 - 7 of 7 Posts

· ^^ tallest Yamaha rider^^
Joined
·
6,290 Posts
Discussion Starter · #1 · (Edited)
i have an '08 r6 and i'm lookin at the integrated tail light from customLED and i have no idea what the diff. is in the plug and play one and the retrofit...which would be better for me?
thx for any help...also will a '06 integ. tail light fit my 2008???
 

· BACK
Joined
·
383 Posts
my guess is it should fit ur bike..the integ t light cause u should have the same light also ive seen guys get door hinges to put the plate on and lock it so it stays at the angle u want it hope this helps
 

· Registered
Joined
·
57 Posts
I'm not 100% positive, but I think with the retrofit you actually take apart your stock light and install the L.E.D. board inside, then reseal it. With plug and play, you remove the stock light altogether and plug in the new assembly. I think that's the difference.:confused:
 

· Registered
Joined
·
308 Posts
that would be the differance...swap out entire assembly or just internals
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top