Yamaha R6 Forum: YZF-R6 Forums banner
1 - 7 of 7 Posts

·
'09 R6 Vivid Orange
Joined
·
78 Posts
Discussion Starter · #1 ·
Question: What are the two connectors in the picture (blue and black)? They are located right next to the plug for the meter/gauge cluster.

I crashed my bike at the track and the front end blew up, so I'm not sure what these go to and if they were even plugged in after converting my bike to track only. The bike is not in a state currently where I can try and start it to see if they are necessary or if the bike will run without them. Thanks in advance

Blue and black connectors right next to the plug for the gauge cluster:


Wiring pic from BikeBandit (seems like they may be headlight related? Not sure):
 

·
pin it to win it
Joined
·
8,080 Posts
Black one is the air intake temp, not sure on the blue one
 

·
When in doubtThrottle out
Joined
·
5,059 Posts
Air intake temp and pressure sensors right being the cluster in front of the stay on the plastic ram air tube.
 

·
'09 R6 Vivid Orange
Joined
·
78 Posts
Discussion Starter · #5 ·
Forgive me for being dense, but are both of these sensors required for the bike to run? Again, it's track only.

Could I trouble someone to take a quick pic so I know exactly what I'm supposed to be looking at?

Air intake temp and pressure sensors right being the cluster in front of the stay on the plastic ram air tube.
 
1 - 7 of 7 Posts
Top