Yamaha R6 Forum: YZF-R6 Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter · #1 ·
ok so i got a GYT-R kit cdi for my race bike the bike has a 99 harness with the 2 plug system for the cdi. the gytr cdi is an 02 with the single plug. i switched harnesses on the bikes and now the back lights for the guages work but the tach and led display dont work. i switched guages and that aint it. any ideas? the bikes both started and ran, just the guages are dead except the lights.

thanks
 
1 - 1 of 1 Posts
Top